1/ 2 imd10a power management (dual digital transistors) www.rohm.com c 2013 rohm co., ltd. all rights reserved. 2013.11 - rev.c da t asheet ? features ? dimensions (unit : mm) 1) two digital class transistors in a smt package. 2) up to 500ma can be driven. 3) low v ce(sat) of drive transistors for low power dissipation. ? package, marking, and packaging specifications part no. imd10a smt6 d10 t108 3000 package marking code basic ordering unit (pieces) ? absolute maximum ratings (ta=25 ?c) ? equivalent circuit parameter symbol v cc v in i c limits ?50 ?500 unit v ?5 to +5v ma dtr 1 parameter symbol v cbo v ceo v ebo i c limits 50 50 5 100 unit v v v ma dtr 2 parameter symbol pd tstg limits 300(total) ?55 to +150 unit mw total ? ? 200mw per element must not be exceeded. supply voltage input voltage collector current collector-base voltage collector-emitter voltage emitter-base voltage collector current power dissipation storage temperature ? c tj 150 junction temperature c rohm : smt6 each lead has same dimensions eiaj : sc-74 (4) (5) (6) (3) (2) (1) dtr2 dtr1 (4) (5) (6) (3) (2) (1) r1 r1 r2
2/ 2 www.rohm.com c 2013 rohm co., ltd. all rights reserved. 2013.11 - rev.c da t asheet imd10a ? electrical characteristics (ta=25 ?c) dtr 1 dtr 2 parameter symbol min. typ. max. unit conditions transition frequency of the device. v i(off) v o(on) i i i o(off) g i f t r 1 ? ? ? ? ? ? 68 ? ? 70 ? ? 0.1 ? ? ? ? ? ? ? ? ? ? ? ? ? 200 100 ? 0.3 ? 0.3 ? 25 ? 0.5 ? ? 130 v v ma a ? mhz v cc = ? 5v , i o = ? 100a v i(on) ? 1.5 ?? v o = ? 0.3v , i o = ? 100ma i o = ? 100ma , i i = ? 5ma v i = ? 2v v cc = ? 50v , v i = 0v i o = ? 100ma , v o = ? 5v v ce = ? 10v , i e = 50ma , f = 100mhz ? r 2 / r 1 80 100 120 ? ? ? ? parameter symbol min. typ. max. unit conditions bv cbo bv ceo bv ebo i cbo i ebo v ce(sat) h fe r 1 50 50 5 100 7 250 10 0.5 0.5 0.3 600 13 v v v a a v k i c = 50a i c = 1ma i e = 50a v cb = 50v v eb = 4v i c = 10ma , i b = 1ma v ce = 5v , i c = 1ma transition frequency f t 250 mhz v ce = 10v , i e = ? 5ma , f = 100mhz input voltage output voltage input current output current dc current gain transition frequency input resistance resistance ratio transition frequency of the device. collector-base breakdown voltage collector-emitter breakdown voltage emitter-base breakdown voltage collector cutoff current emitter cutoff current collector-emitter saturation voltage dc current transfer ratio input resistance ? ? electrical characteristic curves v o = ? 5v ?500 1k 200 100 10 1 2 5 20 50 500 ?1m ?2m ?5m ?10m ?20m ?50m ?100m ?200m ?500m output current : i o (a) dc current gain : g i fig.1 dc current gain vs. output current characteristics ?40 c ta= 100 c 25 c i o /i i = 20/1 ?500? 1m ?2m ?5m ?10m ?20m ?50m ?100m ?200m ?500m ? 1 ? 500m ? 200m ? 100m ? 20m ? 50m ? 10m ? 1m ? 2m ? 5m output current : i o (a) output voltage : v o(on) (v) fig.2 output voltage vs. output current characteristics ta= 100 c ? 40 c 25 c v o = ? 0.3v ?500 ?100 ?20 ?10 ?1 ?100m ?200m ?500m ?2 ?5 ?50 ?1m ?2m ?5m ?10m ?20m ?50m ?100m ?200m ?500m output current : i o (a) input voltage : v i(on) (v) fig.3 input voltage vs. output current (on characteristics) ta= ?40 c 100 c 25 c ta= 100 c 25 c ?40 c v cc =? 5v 0 ?1 ?2 ?3 ?10m ?2m ?1m ?100 ?20 ?10 ?1 ?2 ?5 ?50 ?200 ?500 ?5m input voltage : v i(off) (v) output current : io (a) fig.4 output current vs. input voltage (off characteristics) v ce = 5v 100 200 500 1m 2m 5m 10m 20m 50m 100m 1k 500 200 100 20 50 10 1 2 5 collector current : i c (a) dc current gain : h fe fig.5 dc current gain vs. collector current ta= 100 c ? 40 c 25 c l c /l b =10 100 200 500 1m 2m 5m 10m 20m 50m 100m 1 500m 200m 100m 20m 50m 10m 1m 2m 5m collector current : i c (a) collector saturation voltage : v ce (sat) (v) fig.6 collector-emitter saturation voltage vs. collector current ta= 100 c ? 40 c 25 c
r1102 a www.rohm.com ? 2013 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes the information contained herein is subject to change without notice. before you use our products, please contact our sales representative and verify the latest specifica- tions : although rohm is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. rohm shall have no responsibility for any damages arising out of the use of our poducts beyond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14)
|
